Hose and tubing
Industrial hose is usually sized by its inside diameter, while tubing used with push-to-connect and compression fittings is sized by its outside diameter. Inch and metric tube sizes do not interchange, even when they look close.
- Hose: inside diameter, overall length and the text printed along it
- Tubing: outside diameter, wall thickness or inside diameter, and material
- Working pressure, temperature and the media carried
Hose assemblies
Measure overall length from the end of one fitting to the end of the other. For angled fittings, note each angle and how the two ends are oriented relative to each other, and photograph both ends against a tape measure.
Pipe threads
Pipe-thread sizes are nominal, so the size name does not match the measured diameter: a 1/2 inch NPT thread measures about 0.84 inch across. NPT and BSP threads look similar but do not interchange. Send measurements rather than a guessed size.
- Outside diameter of a male thread, or inside diameter of a female thread
- Threads per inch or pitch, measured with a thread gauge
- Whether the thread is tapered or parallel
- Any sealing face, O-ring or cone on the fitting
